View WB21-12500-U2-D-BAB1_8583276.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

wb21 bab1 db-wb21-e-2013-11 1/21 ? asm gmbh www.asm-sensor.com specifcations outputs u2 u8 i1 voltage 0.5 ... 10 v voltage 0.5 ... 4.5 v current 4 ... 20 ma, 3 wire resolution <0,05 mm linearity 0.10 % f. s.; optional 0.05 % sensing device magnetic absolute encoder material aluminium, plastic and stainless steel; tape: stainless steel, 10 mm wide, 0.08 mm thick protection class ip67/ip69k (with mating connector) connection connector m12, 5 pin shock en 60068-2-27:2010, 100 g/11 ms, 100 shocks vibration en 60068-2-6:2008, 20 g 10 hz-2 khz, 10 cycles emc, temperature refer to output specifcation position sensorwithmeasuringtape ? measurementrangeupto20,000mm ? protectionclassip67/ip69k ? stainlesssteelmeasuringtape ? analog output orderexample:wb21-8000-i1- a -l10-m12r5-bab1 positape ? wb21 analogoutput ordercodewb21 modelname measurementrange(inmm) 8000 / 10000 / 12500 / 15000 / 17500 / 20000 output u2 = 0.5 ... 10 v signal conditioner u8 = 0.5 ... 4.5 v signal conditioner i1 = 4 ... 20 ma signal conditioner signalcharacteristics a = increasing (eg. 4 ... 20 ma) d = decreasing (eg. 20 ... 4 ma) linearity l10 = 0.10 % (standard) l05 = 0.05 % (optional) connection m12r5 = connector m12, 5 pin dustwiper bab1 ordercodeconnectorcableseepage17
wb21 bab1 db-wb21-e-2013-11 2/21 ? asm gmbh www.asm-sensor.com positape ? wb21 analogoutput,programmable specifcations output u2/pmu u8/pmu i1/pmu voltage 0.5 ... 10 v, programmable voltage 0.5 ... 4.5 v, programmable current 4 ... 20 ma, 3 wire, programmable resolution <0,05 mm linearity 0.10 % f. s.; optional 0.05 % sensing device magnetic absolute encoder material aluminium, plastic and stainless steel; tape: stainless steel, 10 mm wide, 0.08 mm thick protection class ip67/ip69k (with mating connector) connection connector m12, 5 pin shock en 60068-2-27:2010, 100 g/11 ms, 100 shocks vibration en 60068-2-6:2008, 20 g 10 hz-2 khz, 10 cycles emc, temperature refer to output specifcation position sensorwithmeasuringtape ? measurementrangeupto20,000mm ? protectionclassip67/ip69k ? stainlesssteelmeasuringtape ? analog output,programmable orderexample:wb21-8000-u2/pmu- a -l10-m12r5-bab1 ordercodeconnectorcableseepage18 ordercodewb21 modelname measurementrange(inmm) 8000 / 10000 / 12500 / 15000 / 17500 / 20000 output u2/pmu = 0.5 ... 10 v signal conditioner, programmable u8/pmu = 0.5 ... 4.5 v signal conditioner, programmable i1/pmu = 4 ... 20 ma signal conditioner, programmable signalcharacteristics a = increasing (eg. 4 ... 20 ma) d = decreasing (eg. 20 ... 4 ma) linearity l10 = 0.10 % (standard) l05 = 0.05 % (optional) connection m12r5 = connector m12, 5 pin dustwiper bab1
wb21 bab1 db-wb21-e-2013-11 3/21 ? asm gmbh www.asm-sensor.com positape ? wb21 analogoutput,redundant specifcations output u2r u8r i1r voltage 0.5 ... 10 v, redundant voltage 0.5 ... 4.5 v, redundant current 4 ... 20 ma, 3 wire, redundant resolution <0,05 mm linearity 0.10 % f. s.; optional 0.05 % sensing device magnetic absolute encoder material aluminium, plastic and stainless steel; tape: stainless steel, 10 mm wide, 0.08 mm thick protection class ip67/ip69k (with mating connector) connection connector m12, 8 pin shock en 60068-2-27:2010, 100 g/11 ms, 100 shocks vibration en 60068-2-6:2008, 20 g 10 hz-2 khz, 10 cycles emc, temperature refer to output specifcation position sensorwithmeasuringtape ? measurementrangeupto20,000mm ? protectionclassip67/ip69k ? stainlesssteelmeasuringtape ? analog output,redundant ordercodewb21 modelname measurementrange(inmm) 8000 / 10000 / 12500 / 15000 / 17500 / 20000 output u2r = 0.5 ... 10 v signal conditioner, redundant u8r = 0.5 ... 4.5 v signal conditioner, redundant i1r = 4 ... 20 ma signal conditioner, redundant signalcharacteristics a/a = output 1 increasing, output 2 increasing a/d = output 1 increasing, output 2 decreasing d/d = output 1 decreasing, output 2 decreasing linearity l10 = 0.10 % (standard) l05 = 0.05 % (optional) connection m12r8 = connector m12, 8 pin dustwiper bab1 orderexample:wb21-8000-i1r- a/d-l10-m12r8-bab1 ordercodeconnectorcableseepage19
wb21 bab1 db-wb21-e-2013-11 4/21 ? asm gmbh www.asm-sensor.com specifcations output synchronous serial interface (ssi) resolution 0.05 mm linearity 0.10 % f.s; optional 0.05 % sensing device magnetic absolute encoder material aluminium, plastic and stainless steel; tape: stainless steel, 10 mm wide, 0.08 mm thick protection class ip67/ip69k (with mating connector) connection connector m12, 8 pin shock en 60068-2-27:2010, 100 g/11 ms, 100 shocks vibration en 60068-2-6:2008, 20 g 10 hz-2 khz, 10 cycles emc, temperature refer to output specifcation positionsensorwithmeasuringtape ? measurementrangeupto20,000mm ? protectionclassip67/ip69k ? stainlesssteelmeasuringtape ? digital outputssi positape ? wb21 digitaloutputssi orderexample:wb21-8000-50-mssi-l10-m12r8-bab1 ordercodewb21 modelname measurementrange(inmm) 8000 / 10000 / 12500 / 15000 / 20000 resolution(inm) 50 (other resolutions on demand) output mssi = ssi s ynchronous serial interface linearity l10 = 0.10% (standard) l05 = 0.05% (optional) connection m12r8 = connector m12, 8 pin dustwiper bab1 ordercodeconnectorcableseepage19
wb21 bab1 db-wb21-e-2013-11 5/21 ? asm gmbh www.asm-sensor.com positape ? wb21 digitaloutputcan specifcations output canopen or can sae j1939 resolution setting via can bus linearity 0.10 % f.s.; optional 0.05 % sensing device magnetic absolute encoder material aluminium, plastic and stainless steel; tape: stainless steel, 10 mm wide, 0.08 mm thick protection class ip67/ip69k (with mating connector) connection connector m12, 5 pin shock en 60068-2-27:2010, 100 g/11 ms, 100 shocks vibration en 60068-2-6:2008, 20 g 10 hz-2 khz, 10 cycles emc, temperature refer to output specifcation position sensorwithmeasuringtape ? measurementrangeupto20,000mm ? protectionclassip67/ip69k ? stainlesssteelmeasuringtape ? digitaloutput canopenor cansaej1939 ? optionalredundantcanbus(ondemand) bestellcodewb21 modelname measurementrange(inmm) 8000 / 10000 / 12500 / 15000 / 20000 output mcanop = canopen mcanj1939 = can sae j1939 linearity l10 = 0.10% (standard) l05 = 0.05% (optional) connection m12/can = connector m12, 5 pin dustwiper bab1 orderexample:wb21-8000-mcanop -l10-m12/can-bab1 ordercodeconnectorcableseepage20
e ( 2 : 3 ) f ( 2 : 3 ) e f 9 4 , 2 [ 3 . 7 1 0 ] 1 0 9 [ 4 . 2 8 7 ] 119 [4.6 91] 8 , 9 [ . 3 5 0 ] 8 5 [ 3 . 3 4 6 ] 88 [3.45 3] 6 7 ? 1 2 . 6 3 0 ? . 0 3 9 [ ] 4 , 5 [ . 1 7 7 ] ? 5 [ . 1 9 7 ] 1 0 [.394] 2, 1 [ . 0 8 3] 1 2 , 5 [ . 4 9 2 ] 4 5 4 6 [1.811] 9 9 [ 3 . 8 9 8 ] 7 4 ? 1 2 . 9 2 5 ? . 0 3 9 [ ] 44, 2 [1.740] 5 7 [2.244] 114 [4.4 88] 1 0 0 [ 3 . 9 3 7 ] 2 2,6 [.89 0] 1 8 , 8 [ . 7 4 0 ] ? 5 , 5 [ . 2 1 7 ] 16 , 1 [.634 ] m 12 st ec ker / m 12 c o n necto r db-wb21-e-2013-11 6/21 asm gmbh www.asm-sensor.com positape analogordigitaloutput dimensions in mm [inch] dimensions informative only. for guaranteed dimensions consult factory. dimensionswb21-8000
e ( 2 : 3 ) f ( 2 : 3 ) e f 1 2 0 [ 4 . 7 3 4 ] 1 3 5 [ 5 . 3 1 1 ] 129 [ 5 .08 1] 8 , 9 [ . 3 5 0 ] 8 5 [ 3 . 3 4 6 ] 60 [2.362 ] 90 [3.547 ] 6 7 ? 1 2 . 6 3 0 ? . 0 3 9 [ ] 4 , 5 [ . 1 7 7 ] ? 5 [ . 1 9 7 ] 1 0 [.394] 2, 1 [ . 0 8 3] 1 2 , 5 [ . 4 9 2 ] 12 4 [4.882 ] 1 2 6 [ 4 . 9 6 1 ] 49 [1.929] 1 0 9 [ 4 . 2 9 1 ] 7 4 ? 1 2 . 9 2 5 ? . 0 3 9 [ ] 4 5,6 [1.795] 24,1 [.949] ? 5 , 5 [ . 2 1 7 ] 1 8 , 8 [ . 7 4 0 ] 4 5 db-wb21-e-2013-11 7/21 asm gmbh www.asm-sensor.com positape analogordigitaloutput dimensions in mm [inch] dimensions informative only. for guaranteed dimensions consult factory. dimensionswb21-10000
e ( 2 : 3 ) f ( 2 : 3 ) e f 1 4 4 [ 5 . 6 7 9 ] 1 5 9 [ 6 . 2 5 6 ] 150 [5.9 06] 155 [6.1 09] 8 , 9 [ . 3 5 0 ] 1 5 0 [ 5 . 9 0 6 ] 60 [2.36 2] 9 1 [3.5 87] 1 3 5 [ 5 . 3 1 5 ] 7 4 ? 1 2 . 9 2 5 ? . 0 3 9 [ ] 6 7 ? 1 2 . 6 3 0 ? . 0 3 9 [ ] 13 [.51 2 ] 1 0 [ . 3 94] 1 2 , 5 [ . 4 9 2 ] ? 5 , 5 [ . 2 1 7 ] 49 [1.9 29 ] 24,6 [.969] 47 ,1 [1.854] 17 [.669 ] ? 5 [ . 1 9 7 ] 4 , 5 [ . 1 7 7 ] 1 0 [.394] 2, 1 [ . 0 8 3] 1 8 , 8 [ . 7 4 0 ] m 1 2 s t eck e r / m 1 2 connec t o r 4 5 1 1 5 [ 4 . 5 2 8 ] db-wb21-e-2013-11 8/21 asm gmbh www.asm-sensor.com positape analogordigitaloutput dimensions in mm [inch] dimensions informative only. for guaranteed dimensions consult factory. dimensionswb21-12500
e ( 2 : 3 ) f ( 2 : 3 ) e f 1 7 4 [ 6 . 8 6 0 ] 1 8 9 [ 7 . 4 3 7 ] 1 80 [ 7 .08 7] 185 [7.278] 8 , 9 [ . 3 5 0 ] 1 8 0 [ 7 . 0 8 7 ] 9 4 [3.6 93] 6 7 ? 1 2 . 6 3 0 ? . 0 3 9 [ ] 4 , 5 [ . 1 7 7 ] ? 5 [ . 1 9 7 ] 1 0 [.394] 13 [.51 2 ] 2, 1 [ . 0 8 3] 1 0 [ . 3 94] 1 2 , 5 [ . 4 9 2 ] 70 [ 2 . 7 5 6 ] 55 [2.1 65] 7 9 ? 1 3 . 1 0 2 ? . 0 3 9 [ ] 1 5 6 [ 6 . 1 4 2 ] 27, 1 [ 1 . 067 ] 45,8 [1.8 03] 1 1 5 [ 4 . 5 2 8 ] 8 5 [ 3 . 3 4 6 ] 1 8 , 8 [ . 7 4 0 ] ? 6 , 6 [ . 2 6 0 ] 1 0, 7 [ . 4 21] m1 2 s t ecker / m1 2 c o nnector 45 db-wb21-e-2013-11 9/21 asm gmbh www.asm-sensor.com positape analogordigitaloutput dimensions in mm [inch] dimensions informative only. for guaranteed dimensions consult factory. dimensionswb21-15000
e ( 1 : 2 ) f ( 1 : 2 ) e f 228 [8.976] 2 2 0 [ 8 . 6 7 1 ] 2 3 5 [ 9 . 2 4 8 ] 2 2 8 [ 8 . 9 7 6 ] 1 1 5 [ 4 . 5 2 8 ] 8 5 [ 3 . 3 4 6 ] 6 , 9 [ . 2 7 2 ] 10 [.39 4] ? 5 [ . 1 9 7 ] 4 , 5 [ . 1 7 7 ] 2 , 1 [.083] 1 2 , 5 [ . 4 9 2 ] 96 [3 .780 ] 66 [2.598 ] 27 ,1 [1 .0 6 7 ] 7 4 ? 1 2 . 9 2 5 ? . 0 3 9 [ ] 6 7 ? 1 2 . 6 3 0 ? . 0 3 9 [ ] 2 1 3 [ 8 . 3 8 6 ] ? 5 , 5 [ . 2 1 7 ] 55 [2.165] 45 233 [9.180] 1 0 [.3 94] 48,1 [1.894] m1 2 stecker / m 1 2 conn ector 15,5 [.610] 1 8 , 8 [ . 7 4 0 ] db-wb21-e-2013-11 10/21 asm gmbh www.asm-sensor.com dimensions in mm [inch] dimensions informative only. for guaranteed dimensions consult factory. positape analogordigitaloutput dimensionswb21-17500,wb21-20000
u2 u8 i1 db-wb21-e-2013-11 11/21 ? asm gmbh www.asm-sensor.com positape ? u2,u8andi1 analogoutput u2 voltage output 0.5 ... 10 v excitation voltage 10 ... 36 v dc excitation current typ. 20 ma at 24 v dc typ. 20 ma at 24 v dc max. 60 ma output voltage 0,5 ... 10 v dc output current 2 ma max. measuring rate 1 khz standard stability (temperature) 50 x 10 -6 /c f.s. (typ.) protection reverse polarity, short circuit operating temperature -40 ... +85 c emc en 61326-1:2013 i1 current output 4 ... 20 ma, 3 wire excitation voltage 10 ... 36 v dc excitation current typ. 36 ma at 24 v dc typ. 70 ma at 12 v dc max. 100 ma load r l 500 ? max. output current 4 ... 20 ma measuring rate 1 khz standard stability (temperature) 50 x 10 -6 /c f.s. (typ.) protection reverse polarity, short circuit operating temperature -40 ... +85 c emc en 61326-1:2013 u8 voltage output 0.5 ... 4.5 v excitation voltage 10 ... 36 v dc excitation current typ. 17 ma at 24 v dc typ. 32ma at 12 v dc max. 60 ma output voltage 0,5 ... 4,5 v dc output current 2 ma max. measuring rate 1 khz standard stability (temperature) 50 x 10 -6 /c f.s. (typ.) protection reverse polarity, short circuit operating temperature -40 ... +85 c emc en 61326-1:2013 outputsignals excitation + gnd signal + signalwiring/ connection outputsignal connector pin cablewire color excitation + 1 brown signal 2 white gnd 3 blue do not connect! 4 black do not connect! 5 (grey) view to sensor connector
u2/pmu u8/pmu i1/pmu db-wb21-e-2013-11 12/21 ? asm gmbh www.asm-sensor.com i1/pmu current output 4 ... 20 ma, 3 wire excitation voltage 10 ... 36 v dc excitation current typ. 36 ma at 24 v dc, typ. 70 ma at 12 v dc max. 100 ma load r l 500 ? max. output current 4 ... 20 ma measuring rate 1 khz standard stability (temperature) 50 x 10 -6 /c f.s. (typ.) protection reverse polarity, short circuit operating temperature -40 ... +85 c emc en 61326-1:2013 u8/pmu voltage output 0.5 ... 4.5 v excitation voltage 10 ... 36 v dc excitation current typ. 17 ma at 24 v dc, typ. 32 ma at 12 v dc max. 60 ma output voltage 0,5 ... 4,5 v dc output current 2 ma max. measuring rate 1 khz standard stability (temperature) 50 x 10 -6 /c f.s. (typ.) protection reverse polarity, short circuit operating temperature -40 ... +85 c emc en 61326-1:2013 u2/pmu voltage output 0.5 ... 10 v excitation voltage 10 ... 36 v dc excitation current typ. 20 ma at 24 v dc, typ. 38 ma at 12 v dc max. 60 ma output voltage 0,5 ... 10 v dc output current 2 ma max. measuring rate 1 khz standard stability (temperature) 50 x 10 -6 /c f.s. (typ.) protection reverse polarity, short circuit operating temperature -40 ... +85 c emc en 61326-1:2013 positape ? u2/pmu,u8/pmuandi1/pmu analogoutput,programmable outputsignals ) signalwiring/ connection signal connector pin cablewire color excitation + 1 brown signal 2 white gnd 3 blue do not connect! 4 black span/zero 5 grey excitation + gnd signal + span/zero view to sensor connector option-pmu programmingofthestartandendvaluebythecustomer teach-in of start and end value for the options u2/pmu, i1/pmu, u8/pmu is provided by a binary signal span/zero. at the start position connect signal span/zero for a period of 2 3 seconds to gnd via push button. at the end position connect signal span/zero for a period of 5 6 seconds to gnd via a push button. the teached positions will be stored non-volatile. to reset the sensor to factory default signal zero/end must be connected to ground while powering up the sensor for 2 3 seconds.
u2r u8r i1r db-wb21-e-2013-11 13/21 ? asm gmbh www.asm-sensor.com i1r current output 4 ... 20 ma, 3 wire excitation voltage 10 ... 36 v dc excitation current typ. 39 ma at 24 v dc typ. 76 ma at 12 v dc max. 100 ma per channel load r l 500 ? max. output current 4 ... 20 ma measuring rate 1 khz standard stability (temperature) 50 x 10 -6 /c f.s. (typ.) protection reverse polarity, short circuit operating temperature -40 ... +85 c emc en 61326-1:2013 u8r voltage output 0.5 ... 4.5 v excitation voltage 10 ... 36 v dc excitation current typ. 20 ma at 24 v dc typ. 38 ma at 12 v dc max. 60 ma per channel output voltage 0.5 ... 4,5 v dc output current 2 ma max. measuring rate 1 khz standard stability (temperature) 50 x 10 -6 /c f.s. (typ.) protection reverse polarity, short circuit operating temperature -40 ... +85 c emc en 61326-1:2013 positape ? u2r,u8randi1r analogoutput,redundant excitation + gnd signal + (span/zero) signalwiring/ connection channel signal connector pin cablewire color 1 excitation + 1 white 1 signal 2 brown 1 gnd 3 green 1 do not connect! 4 yellow 2 excitation + 5 grey 2 signal 6 pink 2 gnd 7 blue 2 do not connect! 8 red excitation + gnd signal + (span/zero) u2r voltage output 0.5 ... 10 v excitation voltage 10 ... 36 v dc excitation current typ. 22 ma at 24 v dc typ. 43 ma at 12 v dc max. 60 ma per channel output voltage 0.5 ... 10 v dc output current 2 ma max. measuring rate 1 khz standard stability (temperature) 50 x 10 -6 /c f.s. (typ.) protection reverse polarity, short circuit operating temperature -40 ... +85 c emc en 61326-1:2013 outputsignals view to sensor connector
db-wb21-e-2013-11 14/21 ? asm gmbh www.asm-sensor.com mssi synchronous serial ssi interface eia rs-422 excitation voltage 8 ... 36 v dc excitation current typ. 19 ma at 24 v dc typ. 35 ma at 12 v dc max. 80 ma clock frequency 100 khz ... 500 khz code gray-code, continuous progression delay between pulse trains 20 s min. stability (temperature) 50 x 10 -6 / c f.s. (typ.) operating temperature -40 ... +85 c protection short circuit emc en 61326-1:2013 data data clock clock recommended processingcircuit note: extension of the cable length will reduce the maximum transmission rate. view to sensor connector transmission rate cablelength baudrate 50 m 100-400 khz 100 m 100-300 khz dataformat (train of 26 pulses) signalwiring/ connection signal connector pin cablewire color excitation + 1 white excitation gnd 2 brown clock 3 green clock 4 yellow data 5 grey data 6 pink ? 7 blu ? 8 red positape ? mssi digitaloutputssi
db-wb21-e-2013-11 15/21 ? asm gmbh www.asm-sensor.com mcanop canopen communication profle canopen cia 301 v 4.02, slave encoder profle encoder cia 406 v 3.2 error control node guarding, heartbeat, emergency message node id adjustable via lss; default: 127 pdo 3 txpdo, 0 rxpdo, no linking, static mapping pdo modes event-/time triggered, remote-request, sync cyclic/acyclic sdo 1 server, 0 client cam 2 cams certifed yes transmission rates 50 kbit to 1 mbit, adjustable via lss; default: 125 kbit bus connection m12 connector, 5 pins integrated bus terminating resistor 120?, adjustable by the customer bus, galvanic isolated no specifcations excitation voltage 8 ... 36 v dc excitation current typ. 20 ma at 24 v dc typ. 40 ma at 12 v dc max. 80 ma measuring rate 1 khz (asynchronous) stability (temperature) 50 x 10 -6 / c f.s. repeatability 1 lsb operating temperature -40 ... +85 c protection reverse polarity, short circuit dielectric strength 1 kv (v ac, 50 hz, 1 min.) emc en 61326-1:2013 view to sensor connector signalwiring/ connection signal connectorpin shield 1 excitation + 2 gnd 3 can-h 4 can-l 5 positape ? mcanop digitaloutputcanopen
db-wb21-e-2013-11 16/21 ? asm gmbh www.asm-sensor.com positape ? mcanj1939 digitaloutputcansaej1939 mcanj1939 can sae j1939 can specifcation iso 11898, basic and full can 2.0 b transceiver 24v-compliant, not isolated communication profle sae j1939 baud rate 250 kbit/s internal temination resistor 120 ? adjustable by the customer address default 247d, confgurable specifcations excitation voltage 8 ... 36 v dc excitation current typ. 20/40 ma for 24/12 v, max. 80 ma measuring rate 1 khz (asynchronous) stability (temperature) 50 x 10 -6 / c f.s. repeatability 1 lsb operating temperature -40 ... +85 c protection reverse polarity, short circuit dielectric strength 1 kv (v ac, 50 hz, 1 min.) emc en 61326-1:2013 view to sensor connector signalwiring/ connection signalname connectorpinno. shield 1 excitation + 2 gnd 3 can-h 4 can-l 5 namefields arbitrary address capable 1 yes industry group 0 global vehicle system 7fh (127d) non specifc vehicle system instance 0 function ffh (255d) non specifc function instance 0 ecu instance 0 manufacturer 145h (325d) manufacturer id identity number 0nnn serial number 21 bit parametergroup numbers(pgn) confguration data pgn ef00h proprietary-a (pdu1 peer-to-peer) process data pgn ffnnh proprietary-b (pdu2 broadcast); nn group extension (ps) confgurable
kab-xm-m12/4f/w/69k-litze kab-xm-m12/4f/g/69k-litze kab-xm-m12/4f/w-litze ip69k: kab-xm-m12/4f/g-litze ip69k: db-wb21-e-2013-11 17/21 ? asm gmbh www.asm-sensor.com signalwiring m12,4pin connectorpin/cablecolor 1 2 3 4 brown white blue black connectorcable m12, 4 pin suitable for 5-pin sensor connectors the 4-lead shielded cable is supplied with a mating 4-pin 90 m12 connector at one end and 4 wires at the other end. available lengths are 2, 5 and 10 m. wire: cross sectional area 0.34 mm 2 . order code: length in m connectorcable m12, 4 pin suitable for 5-pin sensor connectors the 4-lead shielded cable is supplied with a mating 4-pin m12 connector at one end and 4 wires at the other end. available lengths are 2, 5 and 10 m. wire: cross sectional area 0.34 mm 2 . order code: length in m positape ? accessories connectors
kab-xm-m12/5f/w/69k-litze kab-xm-m12/5f/g/69k-litze kab-xm-m12/5f/w-litze ip69k: kab-xm-m12/5f/g-litze ip69k: db-wb21-e-2013-11 18/21 ? asm gmbh www.asm-sensor.com positape ? accessories connectors connectorcable m12, 5 pin the 5-lead shielded cable is supplied with a mating 5-pin 90 m12 connector at one end and 5 wires at the other end. available lengths are 2, 5 and 10 m. wire: cross sectional area 0.34 mm 2 . order code: length in m connectorcable m12, 5 pin the 5-lead shielded cable is supplied with a mating 5-pin m12 connector at one end and 5 wires at the other end. available lengths are 2, 5 and 10 m. wire: cross sectional area 0.34 mm 2 . order code: length in m signalwiring m12,5pin connectorpin/cablecolor 1 2 3 4 5 brown white blue black grey
kab-xm-m12/8f/w-litze kab-xm-m12/8f/g-litze kab-xm-m12/8f/w/69k-litze kab-xm-m12/8f/g/69k-litze ip69k: ip69k: db-wb21-e-2013-11 19/21 ? asm gmbh www.asm-sensor.com positape ? accessories connectors connectorcable m12, 8 pin the 8-lead shielded cable is supplied with a mating 8-pin 90 m12 connector at one end and 8 wires at the other end. available lengths are 2, 5 and 10 m. wire: cross sectional area 0.25 mm2. order code: length in m signalwiring m12,8pin connectorpin/cablecolor 1 2 3 4 5 6 7 8 white brown green yellow grey pink blue red connectorcable m12, 8 pin the 8-lead shielded cable is supplied with a mating 8-pin m12 connector at one end and 8 wires at the other end. available lengths are 2, 5 and 10 m. wire: cross sectional area 0.25 mm2. order code: length in m
kab-xm-m12/5f/g-m12/5m/g-can kab-xm-m12/5f/g/69k-m12/5m/g/69k-can kab-tconn-m12/5m-2m12/5f-can kab-rterm-m12/5m/g-can ip69k: db-wb21-e-2013-11 20/21 ? asm gmbh www.asm-sensor.com connector/buscable m12, 5 pin can bus the 5-lead shielded cable is supplied with a female 5-pin m12 connector at one end and a male 5-pin m12 connector at the other end. available lengths are 0.3, 2, 5 and 10 m. order code: length in m terminating resistance 5 pin m12 can bus t-piece forbuscable m12, 5 pin can bus order code: order code: positape ? accessories connectors
3 5 [ 1 . 3 7 8 ] 2 0 [ 0 . 7 9 5 ] 45 [1.772] 7 , 5 [ 0. 2 9 5] 7, 5 [0.295] 2 8 [1.102] 2x ? 5,5 5 [ 0 . 1 9 7 ] 40,4 [1 .591] 5 5 [ 2 . 1 6 5 ] 60 [2.362] 40 [1.575 ] wbr1 db-wb21-e-2013-11 21/21 asm gmbh www.asm-sensor.com dimensions in mm [inch] dimensions informative only. for guaranteed dimensions consult factory. tape pulleywbr1 order code: positape accessories tape pulley

▲Up To Search▲

Price & Availability of WB21-12500-U2-D-BAB1

	To Download WB21-12500-U2-D-BAB1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .